Frame

Numbered 1 to 2950 (approx). Bolt on seat stays with drawback type chainstays for rear wheel adjustment. Torque tubes from engine plates to rear wheel.

Wheels

650 x 65mm beaded edge interchangeable with black enamelled rims. 2 secirity bolts. Black spokes with NPB nipples. Rear with separate rear sprocket carrier assembly. (dogged drive).

Mudguards

5” D section, unvalanced, front and rear. Rear with patented hinged number plate and mudguard rear section.

Tanks

Petrol tank with double gold lined panels fitted between frame rails (flat tank). Single 2" external screw type filler. Brass lever petrol tap. Oil tank mounted on rear frame down tube across the frame with spring loaded filler to offside.

Engine

Numbered 1 to 1800 (approx) - 4 valve 346cc with cast iron open valve cylinder head, parallel inlet valves and parallel exhaust. Forward facing parallel exhaust ports with FLANGE fitting to exhausts.18mm side plug. Rockers supported on cast support with clamps to rocker spindles. Sloping pushrods. Forward mounted ML Maglita or round ML magneto. Square scalloped based cylinder barrel and plain drive side crankcase. Total loss oiling with Best & Lloyd pump mounted on timing cover.

Brakes

Dummy belt rim front and rear.

Electrics (standard)

4V ML lighting available. Headlamp mounted on tubular supports. Lighting control mounted on  top frame rail. 6V lighting set provided for export models.

Transmission

4 speed suspended gearbox with hand change on RHS of tank (open gate). Gearbox with external kickstarter stop and double helical gears. Aluminium (painted black) primary chain cover and aluminium rear chainguard.

Carburetter

Stub fitting Senspray with Senspray 2 lever control

Exhaust system

Twin 1 1/2” nickel plated short down pipes into horizontal aluminium expansion chamber mounted in front of the crankcase. Tail pipe to rear wheel.

Standard Fittings

Rear carrier. Non adjustable 7/8" handlebars type 110 with folded type inverted levers. Rear stand. Front stand. Leather tool bag strapped to rear carrier. ML battery carrier (where fitted) mounted on offside of rear carrier. Leather topped pillar mounted pan type saddle. Closed ended ‘D’ section forks. 17" tyre pump.

 

©  Colin Chapple